PACKAGING DETAILS

1.    PACKAGE TYPE: Stick pack

2.    PACKAGE DIMENSIONS: Requested (WxL): 17×100 mm. Fixed package width

Length range (mm): 30-145

3.    PACKAGING MATERIAL: Paper+PE,

4.    WEIGHT: Target: 4gr, Range: 3gr-8gr

Accuracy: +/- %3 (Depends on the product)

5.    PRODUCT: Sugar.

Note: free flowing granules.

6.    CAPACITY: Cycle per minute: 40 – 50

Total per minute: 200 – 250 packs

7.    General Specifications

o   Spare parts catalogue, mechanical dismantling drawings will be provided

o   10 years plc & Touch panel software saving warranty

o   Manual output test and motor jogging functions

o   Reduced sharp edges/corners in mechanical design for safety and anti-bacteria

o   User friendly Touch panel pages

o   Easily accessible mark sensor adjustment

o   Package length control by mark sensor or fixed length which is adjusted from Touch panel

o   User’s manual is given with the machine

o   Machine gives a signal when reaches the number of packages is adjusted on Touch panel

o   Temperature controllers have a PID technology

o   Colors of the machine are blue and white if it’s not SS304 frame

o   Automatic film unwinder

o   Easy film roll changes with air shaft

o   Multi program save and load function

o   Better protection for heating cable connections

o   Machine informs the operator if there is an alarm condition in the machine

o   All machine parts are anodized, coated or galvanized

o   Electrical system of the machine is compatible with European safety standards CE

o   Electrical plan will be provided. Devices, cables, and connections are labeled.

o   Air and power consumption can be calculated after the project details are cleared

o   Required air quality:

– Clean, dry air according to DIN ISO 8573–1.

• All pneumatic products will be out of warranty unless required air used
• Uninterrupted air flow needed
•  The customer must determine the required air quality in function of the process
• All pneumatic products are SMC®
• Simple and compact mechanical architecture
• Easily accessible open frame design
• Reduced energy consumption
• Reduced footprint dimensions
• Air Pressure : 6–8 bars
• Min. temperature : 5°C
• Max. temperature : 40°C
• Max. humidity : 90%
• Aluminum : 5754 & 7075
• Stainless Steel : 304, 316L, 316T
• Gearbox : Bonfiglioli, Nord, Apex
• Electricity : 3P-N-PE, 380VAC 50-60Hz
• Control Voltage : 24VDC
• Plc / Motion control : Siemens S7
• HMI Panel : Siemens
• Sensors : Sick
• Other Items : Eaton, Wago, Omron
• Servo Motor : Siemens
• Servo Actuators : SMC (Japan)
• Bearings : Igus, ORS, SKF, URB, FAG, Asahi, NSK, Beco, INR

8- Granular Filler Specifications

High accuracy filler for granular products less than 10cm³ (~10gr)

• All filling process is done by rotary pneumatic cylinder.
• Filling range can be adjusted mechanically
• All filling process is done indoors
• All the parts which is in contact with the product directly are SS316L or food grade plastics
• Long life rotary cylinder and coupling for avoid of mechanical stress
• Auto synchronization granule filler to machine speed
• Possible to multiply dumping via Touch panel for avoid of bridging
• Possible to multiply dumping via Touch panel for reaching higher volumes
• Possible to fill less than 2cm³ (~2gr) with fixed filler shafts
• Slider table is optional for faster cleaning process
• If the machine bought with product feeding system, level sensor runs ground feeder automatically .